Firmware Upgrade

This tutorial applies to AIRBOT Play, AIRBOT Play Lite and AIRBOT Replay.

This tutorial does not apply to AIRBOT Pro.

Install airbot-configure package on the host.

airbot-configure would install basic udev rules for setting up SocketCAN interfaces and also provides basic tools to bind devices to specific interface names.
Connect to the device via a USB cable.

With airbot-configure installed, AIRBOT Play, AIRBOT Play Lite and AIRBOT Replay would appear as canX in the output of ip link.
Upgrade the firmware with the following command:

Firmware upgrade must not run simultaneously with control server!
```
# Specify the can interface to download the firmware
airbot_fw_upgrade -i <INTERFACE>
```